Lean Hoist

• Maganese steel adopted to ensure high strength steel structure.
• Modular design facilitates ease of transport, erection and dismantlement.
• Collective control system.
• For other configurations, contact GAOLI engineering for information.

Model	SCQ200/200
Playload capacity	kg	2000/2000
Lifting speed (50Hz/380V)	m/min	0~36
Max. lifting height	m	300
Rated speed while installation	m/min	0~36
Erection load capacity	kg	1000/1000
Lifting device capacity	kg	200
Maximum tilt angle		12°
Motor power (25% duty cycle)	kw	2×3×11
Max. spacing between tie-ins	m	4.5
Max. mast height above last tie-in	m	4.5
Hoist car dimension (L×W×H)	m	3.2×1.5×2.5
Mast section type (L×W×H)	mm	650×650×1508
Cage weight (include transmission device)	kg	2×2000
Mast section weight	kg	150 (δ=4.5)
		170 (δ=6.3)
		190 (δ=8.0)

Lean building hoist is designed for building work of special-sized buildings. Its car remains vertical during the movement, and the guiding mast is installed in an inclined angle corresponding to the building. The car's force-bearing columns and frame is made in the same inclined angle of mast which is no more than 12° in common circumstances. 

• Mast sections can be added without special equipment.
• For instructions regarding the installation of the model SCQ200/200 dual car hoist, refer to the manufacturer’s manual.
• Specifications and equipment shown are subject to change without prior notification.
• This product must be used in a safe manner. Furthermore, the use of this product and its components must be in conformity with manufacturer’s specifications and in compliance with all applicable standards, codes, regulations, etc.

Please refer to manufacturer’s manual when installing, operating, servicing, repairing, jumping or dismantling hoist. For alternate configurations and special applications, contact GAOLI company for information.